|
| 2000
SeriesTM Specification Sheet
|
|
| |
| SPECIFICATIONS |
| One-Way
Rental, School Bus and General Purpose Truck Rating |
|
Net input power |
300 hp (223 kW) |
|
Gross input power 1,2 |
330 hp (246 kW) |
|
Net input torque |
520 lb-ft (705 N·m) |
|
Gross input torque 1 |
545 lb-ft (740 N·m) |
| GVW |
30,000
lbs (13,600 kg) |
| GCW |
30,000
lbs (13,600 kg) |
|
| On-Highway
Refuse Rating |
|
Net input power |
300 hp (223 kW) |
|
Gross input power 1,2 |
330 hp (246 kW) |
|
Net input torque |
520 lb-ft (705 N·m) |
|
Gross input torque 1 |
545 lb-ft (740 N·m) |
| GVW
|
23,250
lbs (10,550 kg) |
| GCW
|
N/A |
|
| Transit
Bus Rating |
|
|
Net input power |
180 hp (134 kW) |
|
Gross input power 1,2 |
200 hp (149 kW) |
|
Net input torque |
400 lb-ft (542 Nm) |
|
Gross input torque 1 |
425 lb-ft (576 Nm) |
| GVW
|
26,500
lbs (12,000 kg) |
| GCW
|
N/A |
|
| Transit
Bus Rating with SEM4 |
|
Net input power |
180 hp (134 kW) |
|
Gross input power 1,2 |
200 hp (149 kW) |
|
Net input torque |
445 lb-ft (603 Nm) |
|
Gross input torque 1 |
465 lb-ft (630 Nm) |
| GVW
|
26,500
lbs (12,000 kg) |
| GCW
|
N/A |
|
1 Gross Power and Torque Ratings are included for reference
only. |
|
2 Gross Power Ratings as defined by SAE J1995. |
|
3 Ratio of Transmission Output RPM To Vehicle Ground Speed.
N/V is only used to limit park pawl applications. |
|
4 SEM = Engine controls with Shift Energy Management. |
|
|
| DRIVETRAIN
INTERFACE |
|
Acceptable full-load engine governed speed |
2200 - 4500 rpm |
Acceptable engine idle speed range
(with transmission in Drive) |
500 - 900 rpm |
|
Maximum output shaft speed |
4500 rpm |
|
|
| MOUNTING |
|
Engine |
SAE No. 3 (SAE No. 2 option available) |
|
Chassis |
No additional transmission support required |
|
|
| TORQUE
CONVERTER |
STALL
TORQUE RATIO |
Kp-FACTOR*
AT STALL |
| TC-210 |
2.05 |
118.2
(101.6) |
| TC-211 |
2.00 |
111.3
(95.6) |
| TC-221 |
1.73 |
97.8
(84.0) |
| TC-222 |
1.58 |
85.2
(73.2) |
|
|
Includes standard integral damper which is operational in lockup |
|
*Kp-Factor defines torque converter capacity. Kp = the ratio of converter
pump speed [rpm] divided by the square of pump torque [lb-ft (N·m)]. |
|
|
|
MECHANICAL RATIOS (RANGE)* |
|
First |
|
|
Second |
|
|
Third |
|
|
Fourth |
|
|
Fifth |
|
|
Reverse |
|
| RATIO
COVERAGE |
|
Forward |
|
|
*Gear ratios do not include torque converter multiplication. |
|
|
| CONTROL
SYSTEM |
|
|
Description |
Electronic,
close loop, adaptive with stand-alone Transmission Control Module (TCM)
|
| Driver-To-Transmission
Interface |
|
| |
Transmission Range Selection Switch |
|
|
Allison Transmission |
Allison Transmission |
|
| |
Shift Selector & Mechanical Cable |
|
|
Customer Supplied |
Customer Supplied |
|
| |
| Communication
Protocol ? Engine/Vehicle Interface |
|
|
|
|
|
|
|
|
|
| SPEEDOMETER
PROVISIONS |
| Description |
Non-zero-crossing
square wave |
|
|
|
8 or 16 pulses per revolution of transmission output shaft |
|
| Description |
Zero-crossing
square wave |
|
|
|
20 or 40 pulses per revolution of transmission output shaft |
|
| Location |
Electronic
output from transmission ECU* |
|
*Speedometer
signals can also be generated via a customer supplied sensor in the M18
x 1.5 threaded tachograph provision or the optional 10 x 3 park brake rear
cover. |
|
|
| OPTIONAL
TACHOGRAPH PROVISION |
| Tone-wheel |
6-tooth |
| Mounting |
M18
x 1.5 metric thread |
|
Location |
Transmission rear cover |
|
|
| SIZE |
|
Length (SAE No. 3 FW housing to parking brake mounting provision) |
27.35 in (694.7 mm) |
|
Length (SAE No. 2 FW housing to parking brake mounting provision) |
27.73 in (704.4 mm) |
|
Depth (below transmission centerline) |
11.22 in (284.9 mm) ? standard oil pan |
|
Depth (below transmission centerline) |
10.71 in (272.0 mm) ? optional shallow oil pan |
|
Weight (dry) |
330 lbs (150 kg) |
|
|
| OPTIONAL
TURBINE-DRIVEN POWER TAKEOFF PROVISION (WITH NEUTRAL LOCKUP) ? LEFT
OR RIGHT SIDE |
|
Using One PTO |
1.00 x turbine speed, 250 lb-ft max (339 N·m) |
|
Using Two PTOs |
1.00 x turbine speed, 200 lb-ft max each (271 N·m) |
|
Neutral
Lockup Control for PTO is available as an integral feature of the transmission
control system.
|
|
Neutral
Lockup is limited to engine speeds of 1000 rpm or greater.
|
|
|
| OIL
SYSTEM |
|
Oil type |
Dexron® III |
|
Initial fill (transmission only) |
|
Standard Deep pan |
15 qts (14 liters) |
|
Optional Shallow pan |
13 qts (12 liters) |
|
|
Main circuit oil filter |
Spin-on canister |
|
|
|
Today's engine and axle options have made specifying a truck more demanding.
We can help. Whether you're looking for enhanced fuel economy, increased
productivity or high performance, we have the tools to help you select an
Allison Transmission that will match your specific application needs. Call
1-800-252-5ATD. You'll get the right transmission for your job. |
|
HOME >> TRANSMISSIONS
